Get the hottest car on the track! The NASCAR body with pre-drilled weight holes...just paint, glue weights and you are ready to smoke the track!
Pre-cut car with pre-drilled hole in rear and bottom for weights. This car is so cleanly cut, you don't even need to sand it.

The approximate weight of this car body is 3.6 oz, plus or minus .3 oz.
You will need about 1 to 1.5 oz extra weight for this car.


We recommend using a sanding sealer base before painting.

The NASCAR has fenders that go over the wheel. This is usually allowed in all race rules, but check with your race manager to be sure. This car also has drilled axle holes, not axle slots. Again, most race rules allow drilled axles holes, but some require that you use the axle slots.