Complete Fully Built Derby Cars

Save time - Choose a fully built Car
All the Work is Already Done for You

No time, tools or skills, but still want to race?

Select a pre-built car that is ready to race. It is better to participate than to not show up at all.

These fully assembled cars are ready to race, just add Graphite to the axles to make your car faster!


You just need to add Graphite, and you're ready to go!

Check out our full cars below, or browse through Pre-Cut Blocks and Ready to Assemble Car Kits.



Fully Built Cars - BSA Compliant

fully built pinewood derby car with camoflauge body skin

Camo Car

Camo Car
Completely assembled pinewood derby car with a Camoflauge Body skin


  • Official BSA Lightly Lathed wheels (Our Speed Wheels)
  • Official BSA Highly Polished axles
  • BSA car block right out of the BSA Cub Scout kit.
  • Axles slots are drilled so car rolls straight
  • All four wheels touch the track
  • Standard wheel spacing
  • Camoflauge body skin gives a perfect finish!
  • Cars are precision weighted, tuned for highest performance and track tested.

Only $75.95

fully built pinewood derby car with hot flames body skin

Hot Flames Car

Hot Flames
Completely assembled pinewood derby car


  • Official BSA Lightly Lathed wheels (Our Speed Wheels)
  • Official BSA Highly Polished axles
  • BSA car block right out of the BSA Cub Scout kit.
  • Axles slots are drilled so car rolls straight
  • All four wheels touch the track
  • Standard wheel spacing
  • Hot Flames body skin for a perfect finish!
  • Cars are precision weighted, tuned for highest performance and track tested.

Only $75.95

fully built pinewood derby car with green flames body skin

Green Flames Car

Green Flames
Completely assembled pinewood derby car


  • Official BSA Lightly Lathed wheels (Our Speed Wheels)
  • Official BSA Highly Polished axles
  • BSA car block right out of the BSA Cub Scout kit.
  • Axles slots are drilled so car rolls straight
  • All four wheels touch the track
  • Standard wheel spacing
  • Green Flames body skin for a perfect finish!
  • Cars are precision weighted, tuned for highest performance and track tested.

Only $75.95

fully built pinewood derby car with tie-dye body skin

Tie-Dye Car

Tie-Dye
Completely assembled pinewood derby car


  • Official BSA Lightly Lathed wheels (Our Speed Wheels)
  • Official BSA Highly Polished axles
  • BSA car block right out of the BSA Cub Scout kit.
  • Axles slots are drilled so car rolls straight
  • All four wheels touch the track
  • Standard wheel spacing
  • Cars are precision weighted, tuned for highest performance and track tested.

Only $75.95

fully built yellow pinewood derby car

Blazing yellow Car

Blazing Yellow
Completely assembled pinewood derby car


  • Official BSA Lightly Lathed wheels (Our Speed Wheels)
  • Official BSA Highly Polished axles
  • BSA car block right out of the BSA Cub Scout kit.
  • Axles slots are drilled so car rolls straight
  • All four wheels touch the track
  • Standard wheel spacing
  • Cars are precision weighted, tuned for highest performance and track tested.

Only $75.95

wedge pre-cut pinewood derby car picture

Black Lightning

Black Lightning
Completely assembled and painted pinewood derby car


  • Official BSA Lightly Lathed wheels (Our Speed Wheels)
  • Official BSA Highly Polished axles
  • BSA car block right out of the BSA Cub Scout kit.
  • Axles slots are drilled so car rolls straight
  • All four wheels touch the track
  • Standard wheel spacing
  • 10 layers of paint with a clear gloss sealer
  • Cars are precision weighted, tuned for highest performance and track tested.

Only $89.95

wedge pre-cut pinewood derby car picture

Red Thunderbolt

Red Thunderbolt
Completely assembled and painted pinewood derby car

BSA compliant car with all features described above, painted in RED.


Only $89.95

wedge pre-cut pinewood derby car picture

Blue Flash

Blue Flash
Pre-Built pinewood derby car!

BSA compliant car with all features described above, painted in BLUE.


Only $89.95

The PRO Car - Pushing the Speed Limit

wedge pre-cut pinewood derby car picture

PRO Car

PRO Car
Fully Built pinewood derby car!

The PRO Car pushes the limits.
It is our best fully built BSA car.

  • BSA Grooved and Graphite-coated axles
  • PRO BSA Ultra-Lite graphite-coated wheels
  • Left front wheel raised to reduce friction further
  • Built as a "rail rider"

The PRO Car uses BSA wheels, axles and BSA block.

It is track tested and precision tuned for the highest performance.


Rules Notes:
  • The Ultra-lite wheels have all BSA markings inside and out, but the tread is visibly thinner. If your rules do not allow "lathing", you can not use this car.
  • The graphite-coating on the wheels make the tread appear SILVER. If your rules do not allow graphite, you can not use this car.
Only $109.95

Pre-Weighted and primed pinewood derby Car Bodies

Pre-weighted and primed pinewood derby car body - The Grey Ghost

They will only see the Ghost when it crosses the finish line...ahead of the pack.

Car is a standard pinewood derby block that has been pre-weighted with optimal center of gravity, sanded and coated with a Silver Base Coat (heavier than Primer). The block is pre-drilled on the bottom for our Tungsten BBs or Tungsten Putty to bring your car up to exactly 5.0 oz

Only $45.95

Pre-weighted and primed pinewood derby Surfboard car body

The Surboard Car is the same as the Grey Ghost with a low profile car design.

Only $45.95

      Pinewood Derby
      Tips & Hints

      When your wheel rubs against the axle head it creates friction. To reduce this friction, file the head back slightly using an Axle File to reduce the friction area.



    • Pinewood Pro Security Verified Trust

    • Risk Free Guarantee Pinewood Pro
    • Pinewood Derby
      lubes Tip

      When lubing your wheels and axles, shoot graphite powder into the wheel bore, spin your wheels, and repeat. Do this over newspaper in your garage or outside the house.


      Pinewood Derby
      building Hint

      Don't put a round peg (axle) in a square hole! Axle slots are square but your axles are round, making it difficult to get them to go in straight. Use a drill press or the PRO Driller to redrill the axle slot so you have a straight round hole to insert your axles


    • Helping Pinewood Derby Racers
      pinewood derby authority
      ...for over 15 years.

    • pinewood derby winner

      My son peter took first place with his car. Thanks for your products,
      - Tony from TX



    • This was our first year racing in the Pinewood Derby. We came out in second place. Thanks for all your help, without your book, we would not have won!! Look at that big smile.
      - Eli from TN



    • derby winner with medal

      My son won 2nd place Medals. This was made possible by your personal assistance and Pinewood Pro products. Thank you, Joe for being the man you are and providing a service to our Youth.
      - Mark from HI

    • Father and Son Undefeated Racers

      You people offer the very finest support and equipment for Pinewood derby cars on the planet! We went undefeated for the second year in a row. Cheers!
      - Wayne

Complete Fully Built Pinewood Derby Cars