Pinewood Derby PRO Driller™ Tool

The PRO Driller™ is a patented mini-drilling jig that gives you four ways to increase the speed of your pinewood derby car.

  1. Drill perfectly straight axle holes. Straight cars don't hit the center rail (or hit the side rails for center-less tracks). Extra energy goes to increase your car's speed.

  2. Drill a raised wheel hole. It takes less energy to turn 3 wheels. Extra energy goes to speed.

  3. Drill 2.5 degree angled axle holes to cant your wheels. Canted wheels migrate toward the axle head where there is less friction. Less friction means more speed.

  4. Create an extended wheelbase. Your car has more stability, which means more speed.

  5. If you are going to buy one PRO Tool, this is the one.

Pinewood Derby driller Pro Tool

The PRO Driller™ Tool
U.S. Patent No. 9,095,912


straight drill guide holes

Drill precision straight axle holes
Drill raised wheel axle hole

drill 2.5 degree angled axle holes

Drill 2.5 degree axle holes to cant your wheels

Cool Features

  • Patented View Port allows you to see through the driller. Quickly and easily position it over the existing pre-cut axle slots so you can drill the axle slot straight. Axles can be pushed in with your finger and they will be straight.

  • The PRO Driller is adjustable so there is no need to shim or sand your block to make it fit. It will fit ANY pinewood derby block; BSA Cub Scout, Awana, Pine-Car, Royal Rangers, etc.

  • It's blue!

How to Use the Pro Driller™ Tool

  1. Loosen the two screws to open the PRO Driller™, then put it over your car.
  2. tightening Pinewood Derby drill guide

  3. Position the PRO Driller™ by sliding it where you want to drill. Use our exclusive View Port if you want to drill the axle slot so your axles are perfectly straight.
  4. sliding Pinewood Derby PRO Driller Tool

  5. Squeeze the sides of the PRO Driller™ so it is snug to the block, then tighten the two screws.
  6. Use a clamp to secure the PRO Driller™ to your block so it doesn't move.
  7. drilling with PRO Driller Tool

  8. Insert your drill bit into the hole you want and start your drill. Be sure to gently slide the drill bit in and out a few times to clear the wood chips and to make a clean hole.
  • To make the axle hole deep enough, be sure the drill bit extends 1.5"
  • Carefully insert your drill be and be sure it is straight so you don't torque the drill bit and snap it off!

Drilling straight axle holes into axle slots

  1. Slide the PRO Driller™ over the axle slot and position it by looking through the View Ports.
  2. View Port to align axle holes in axle slot

  3. Slide a drill bit into the top hole of the PRO Driller™ so you can see the drill bit slide into the axle slot.
  4. While holding the PRO Driller™ tight against the block, tighten the two screws to lock it in place.
  5. Clamp the PRO Driller™ tool so it doesn't move.
  6. Gently insert your drill bit into the top guide hole and drill to create an accurate straight axle hole in the axle slot.

Drilling a Raised Wheel

pinewood derby raised wheel

Drilling a raised wheel for your pinewood derby car is easy.

Just align and secure the PRO Driller™ Tool as described above. Then drill into the bottom, center guide hole.

Your raised pinewood derby wheel will be 3.5mm off the track. Raising a wheel reduces makes your car start faster and roll faster because it takes less energy to turn 3 wheels than 4. That energy goes to your car's speed.

Category PRO Speed Product Speed Notes
Lubricants pinewood derby graphite

PRO Graphite

Pinewood PRO Graphite is a special blend of dry powdered graphite with sub-micron molybdenum disulfide additive. It substantially decreases friction!

Track tests show a 17% to 20% speed increase, depending on the axles being used.
Axles pinewood derby Super Speed Axles

PRO Super Speed,
Graphite-Coated Axles

We recommend our PRO Super Speed grooved and graphite-coated axles, which out performed every axle we tested.

Our track tests showed a 16.7% speed increase over stock BSA axles.

We also offer BSA grooved and graphite-coated axles.

graphite-coated BSA speed wheels

PRO BSA Ultra-Lite,
Graphite-Coated Wheels

We recommend our PRO BSA Ultra-Lite graphite-coated wheels, which out performed every BSA wheel we tested.

Our track tests showed a 23.8% speed increase over stock BSA wheels.

We also offer lightly lathed BSA wheels.

pinewood derby PRO tools
PRO tools

PRO tools do everything from drilling axle holes so your car rolls straight, to polishing the inside of your wheel bore for that little extra speed, to rail rider tools for a technical advantage.

We even have handy tools for gapping your wheels and an Axle Puller to remove your axles without damaging your wheels.

drilled pinewood derby cars
drilled blocks

Drilled blocks insure that your car rolls straight and also offers a raised wheel option to increase speed.
Pre-Built Cars

pre-cut pinewood derby cars
fully built PRO cars

If you can not build your own car, our fully built PRO pinewood derby cars are fully built and tested for speed!

These cars are precision tuned, track tested and ready to race.
    • Pinewood Pro Security Verified Trust

    • Risk Free Guarantee Pinewood Pro

      Pinewood Derby
      Tips & Hints

      Make your car slim. If your car is too chunky, there will be lots of weight in the wood, leaving less weight for your weights. You want lots of weight so you can move the center of gravity to the optimal point to maximize inertia.

      Pinewood Derby
      winning Tip

      Winning Pinewood Derby Secrets contains all the tips you need to win your race. Updated annually with the latest tips and speed products, our book has proven results with 1000's of winners... but don't take our word for it! Read over 90 Customer Reviews and check out our Winners Gallery!

      Pinewood Derby
      building Hint

      Don't attach feathers or big decorative parts that can cause drag. This will decrease your car speed

    • Helping Pinewood Derby Racers
      pinewood derby authority
      ...for over 15 years.

    • I can't describe how happy my Son was to win! I'm a single Mom and didn't know how to build a car. I was so happy to find your amazing site. I'm beaming with happiness for my son.
      - Miss M from MO

    • One of my girls won the "girls fav" car which was picked by all the girl scouts as their fav. Thanks
      - Stephanie

    • derby winner with medal

      My son won 2nd place Medals. This was made possible by your personal assistance and Pinewood Pro products. Thank you, Joe for being the man you are and providing a service to our Youth.
      - Mark from HI

    • pinewood derby champion

      We won! In the championships we beat 24 other Bears and won every heat.
      - Kevin K. from CA

    • We downloaded Winning Pinewood Derby Secrets and began reading and working. We won first place overall in our Pack! Alex is a Webelos 2 this year, so it was our last chance and we won!
      - Brad and Alex

    • Using these axles and BSA speed wheels, we set a track record, went undefeated and won the pack championship. My son is thrilled to be heading to districts and let me tell you, a winning scout is a happy scout. Can't recommend these enough!
      - Natalie from CO

Pinewood Derby Car PRO Body Tool