PRO Bent 2.5° Polished Pinewood Derby Axles (2)

Pinewood Pro’s 2.5° steering axles start as our PRO Pinewood Derby Speed Axles, complete with two strategic grooves for discreetly storing graphite and reducing wobble by creating a perfect 90° angle. We then we add these additional upgrades:

• 2.5 degree shaft bend to cant the rear wheels. More on that below!

• Angled underside of the axle head to reduce wheel contact friction

• Slotted head to easily turn the axle with a screwdriver

Why use 2.5° bent axles?

2.5° bent axles orient your wheels towards the axle head where there is less friction, and away from the car body where there is more friction in a process known as “canting.” Less friction = faster car!

These axles are pre-bent in the perfect spot away from the wheel. You can also use them to build a rail rider car!

How do I install 2.5° bent axles?

• Gently insert the axles into the rear slots as you would with a straight axle 

• PRO Tip: Use the PRO Axle Aligner Guide to help ensure the straight end goes in straight

• Turn the axles using the convenient slot in the head to twist the axle with a flathead screwdriver so the wheel is sitting on just the inner edge of the tread

• Alternatively, use our PRO Axle Hole Driller Tool to drill your own 2.5º hole into the car body directly and insert a straight axle for the same effect.

PRO Tip: You cannot see a 2.5 degree bend with the naked eye! You’ll notice the difference by rolling the axle across a flat surface.

Product Code: 040375