| |
|
|
The fastest axles on the market,
guaranteed! |
PRO Super Speed
Axles
The fastest
axles on the
market!
Super-smooth
polished and nickel plated, secret cuts reduce friction
and eliminate wobble
- Better than polished!
- These axles are machined perfect, then polished,
then nickel plated for a super smooth, mirror-like
finish
- No burrs, scratches or ridges
- Just
insert these beauties and you are ready to race!
• Friction
eliminator!
- Cut in middle of
wheel so less axle rubs on wheel
- Wheel does not
contact axle so you have no friction (none, zero!!!)
in this area
- Provides a cavity to hold graphite
during the race
• Friction
Reducer!
- Tapered head so only a
small amount is rubbing on the wheel
• Wobble
Eliminator!
- Axle shaft is
undercut at the head to create a perfect 90 degree
edge which eliminates wheel wobble. This eliminates
another problem that slows down your car.
-
Undercut also eliminates friction in this area because
less wheel surface is rubbing on the axle.
-
Undercut also provides another secret cavity to hold
graphite during the race
• Optimal
Performance!
- Axles are
machined perfectly round and straight
for optimal performance
Get the fastest
axles on the market,
guaranteed!
|
 |
PRO Super Speed
Axles - Graphite-Coated!
The fastest
axles on the
market just got faster!
|
Our special multi-step process applies a perma-coating to your axles to keep graphite on your axles right through the Finals!
Independently tested to be the fastest axles on the market, bar none.
Set of 4 axles
only $14.95
Order
Now!
|
|
|
PRO Speed
Axles
Polished and Nickel Plated for Maximum Speed
-
Better than
polished! - These axles are
machined perfect, then polished, then nickel plated
for a super smooth, mirror-like finish - No burrs,
scratches or ridges • Friction
Reducer!- Tapered head so only a
small amount is rubbing on the wheel • Optimal
Performance!- Axles are machined
perfectly round and straight for optimal
performance
The axles in your kit have burrs and
imperfections that must be removed for your car to be
competitive. We've done the work for you. Just insert
these beauties and you are ready to
race!
|
|
 |
BSA
Polished Axles
No need to sand, debur, file
and polish your axles.
We did the hard part
for you!
- Burrs removed on axle
shaft
- You must remove these
burrs of they will grind inside the wheel bore.
• Crimp marks removed
from underside of head
- Crimp
marks must be removed or they will grind into your
wheel, like ABS brakes!
• Nail head is cut back
at an angle
- Angling the head
reduces friction where the head meets the wheel.
• Polished
- The nail is then polished to remove
imperfections. However, these nails are not as good as
our Speed Axles above...we recommend a light polishing
using our axle polishing kit below to get maximum
performance.
Official BSA Polished
Axles - the hard part is
done!
|
|
 |
Axle Polishing Kit
This Pinewood Derby Axle polishing kit contains five BSA
axles,
black wet-or-dry sandpaper, pumice and full
instructions with pictures for polishing your axles to a
mirror finish.
If you don't buy one of our pre-polished axles sets, axle polishing is a must or your car will not be competitive!
We also recommend this kit for our BSA axles that are lathed and polished but this kit will reduce friction even further to bring your BSA axles to a mirror finish.
Everything you need in one
kit, including easy to follow instructions.
only $4.95
Order
Now!
|
|
|
The fastest wheels on the market,
guaranteed!
|
PRO BSA Speed
Wheels
The Ultimate Speed
Advantage
The fastest wheels on the
market,
guaranteed!
We
won the District Race with these
special
graphite-coated wheels!
Secret patented multi-step process. Wheels
are precision sanded
to remove imperfections then
perma-coated with moly lube.
The result is reduced friction, we like
to call friction-free, where the wheel contacts the
track. In addition, and more importantly, friction
is decreased where the wheel hub rubs against the
car.
Your car will fly down the track like on
a frictionless cushion of air.
More info on...PRO
Speed Wheels
only $24.95
Order
Now!
|
|
 |
BSA
Lathed Speed Wheels |
-
Lathed tread........rolls
straight, no bumps!
-
Lathed wheel hub...less
friction on car!
-
Reamed axle slot...less
friction on axle!
-
2.1g
lighter............fast start, faster
speed!
-
Matched set..........perfect
balance! |
|
Read how BSA
Lathed Wheels give you
7 speed
advantages!
only
$15.95
Order
Now! |
|
| |
|
|
|
 |
Matched
BSA Wheel Set
Not all wheels are created
equal
Why a matched set?
BSA manufactures wheels from 18 different molds,
numbered 1 to 18. The wheels in your kit can be from
any of the 16 remaining molds.
Problem is,
each mold is slightly different. Wheels can have
slightly outside diameters, different bore sizes, hubs
and tread characteristics. When every milisecond counts,
you want each wheel to be exactly the same because small
differences will make the car slightly off balance
affecting speed. Just like the car you drive, your
wheels should be "balanced" to get optimal
performance.
Pinewood Pro Matched wheel sets
contain four wheels, each from the same mold to give you
optimal performance, balance and
speed.
only
$7.95
Order
Now!
|
|
 |
The Quad Dual II
Precision drilled pinewood car block
7 Speed
Advantages over standard blocks
The Quad Dual II block gives you the
following advantages.
-
Precision drilled for true axle
alignment.
-
Axles are angled up slightly to
prevent wheels from rubbing against the body.
-
One wheel is raised (optional).
Reduces rolling resistance.
-
The Quad Dual II is precision drilled
in four configurations all in one block!
1.
Standard wheelbase with axle slots on one side
2.
Extended wheelbase with precision drilled axle holes
3. Standard wheelbase with precision drilled axle
holes
4. Standard or Extended wheelbase with one
raised wheel
-
Don't need the extra holes?
...just fill them in with a dab of wood
filler!
Choose one configuration or cut it
in half and make two cars!
-
Axles are placed higher on the body to
cut air drag.
-
High Quality Pine - Reduces the
chances of splitting or chipping.
Only $7.95
Order
Now!
More info on..."The
Quad Dual II" |
|
|
Graphite with Moly additive
This "Hidden
Secret" will put you
ahead of the pack!
Our special blend of graphite with sub-micron size
moly designed to cling to wheels and axles. High carbon
content reduces friction for superior lubrication,
giving your car the winning edge. No more dry chatter in
those final heats.
only
$3.95
Order
Now!
|
|
 |
NEW! Synthetic Oil
that outperforms graphite.
Set your car apart from
the pack.
NyOil II is a thin film synthetic
lubricant that outperforms dry
graphite!
Why buy NyOil
II? |
-
Out performs
graphite! ...your car is faster than
competition
-
Cleaner! ...no "black
powder" mess
-
Lasts Longer! ...when
graphite has long since dropped off, NyOil II
remains |
|
To apply NyOil
II |
-
Simply apply two or three drops to a
pipe cleaner and insert into the wheel to lube the
inside of the wheel. Rub off excess oil.
-
Next, put two drops on each axle, near
the head. |
| Helpful Hints |
|
|
only $8.95
Order
Now!
|
|
 |
Cylinder
Weights
~3 oz weights in segments
Barrel weights are
inserted into the back of your car. Just drill a hole in
the back of the block, break off the exact amount of
weight you need and slide them in.
only $4.95
Order
Now! |
|
|
Stick-on
Weights
3 oz weights in twelve
segments
Stickon weights are
easily applied anywhere on your car. Just peel off the
backing and stick them on. Small segments allow you to
fine tune your car weight.
This set comes in 12
convenient .25 oz segments so you can apply the exact
weight you need.
Caution: You must handle lead
weight with gloves. Children should not handle lead
weights.
only $2.95
Order
Now!
|
|
 |
PRO
Tools
Give your car that extra speed
advantage |
-
PRO Body Tool for drilling precision
axle holes (includes #44 axle drill bit)
-
PRO Hub Tool - to cone wheel
hubs
-
PRO Axle Press - to fix axles
-
PRO Bore Polisher - to polish wheel
bore
-
PRO Mandrel - to round and polish
wheel tread
|
| Click
to See details of PRO Tools |
|
|
Pinewood Derby Axle File
Use
this handy file to remove the burrs and crimp marks from
your axles to increase speed.
You must file your
axles if you are going to have a competitive car!
Only
$3.95
Order
Now!
|
|
| |
Wheel and
Axle Alignment Tool
Eight quick and easy
adjustments in one tool!
 PRO Alignment
Tool |
| |
-
Axle alignment -
makes your car roll straight
-
Wheel alignment -
camber makes wheels square so car rolls straight
-
Wheel spacing -
Checks wheel clearance against body to make sure
wheels do not bind or wobble.
-
Wheel height check -
balance weight and makes car roll straight
-
Toe in, Toe out - a
wheel check to make car roll straight
-
Track clearance - be
sure car will not drag on center rail
-
Verify car is legal
length
-
Verify car is legal
width
The PRO alignment tool is made of a
flexible, durable white polycarbonate so it will not
wear or break.
More info on PRO
Alignment
Tool
Only
$4.95
Order
Now! |
|
| |
