Pre-Cut Pinewood Derby Cars

Save time - start with a pre-cut car body

No tools? No time? Don't have the skills? Don't worry!
Select a pre-cut pinewood derby car that is ready for paint!
You can paint these pre-cut cars as is... or give them a light sanding to round off the edges...
or have fun making new cuts to modify the design.
We did the hard part. You do the fun part painting and decorating.


Check out our Pre-Cut Blocks below, or browse through Ready to Assemble Car Kits and Pre-Built Cars.

Pre-Cut pinewood derby Cars

Corvette pre-cut pinewood derby car

America's Sports Car!
The Corvette car is pre-drilled with two 3/8" weight holes in the rear. Just insert tungsten cylinder or zinc round weights and seal the hole with wood putty.

Only $7.95

Mustang Pre-cut pinewood derby car


Can be used for our Lightning McQueen Design

Add some horse power with this American Classic muscle car.
The Mustang is pre-drilled with two 3/8" weight holes in the rear. Just insert tungsten cylinder or zinc round weights and seal the hole with wood putty.

Only $7.95

Camaro Pre-cut pinewood derby car




The Camaro is another American Classic muscle car.
The Camaro is pre-drilled with two 3/8" weight holes in the rear. Just insert tungsten cylinder or zinc round weights and seal the hole with wood putty.

Only $7.95

Firebird Pre-cut pinewood derby car



My Silver '68 Firebird with a 350hp 3sp on the floor was an awesome car. The firebird is still in production and you can make a cool 7" version of this beauty.
Pre-drilled with two 3/8" weight holes in the rear. Just insert tungsten cylinder or zinc round weights and seal the hole with wood putty.

Only $7.95

Lotus pre-cut pinewood derby car



Classic, Hot European Sports Car

The Lotus is pre-drilled with two 3/8" weight holes in the rear. Just insert tungsten cylinder or zinc round weights and seal the hole with wood putty.

Only $7.95

Stock Car pre-cut pinewood derby car


Perfect for our Green Hornet Car Design

Add some muscle to your car.
The Stock Car is pre-drilled with two 3/8" weight holes in the rear that you can use for tungsten or zinc round weights. Just slide them in and seal the hole with wood putty.

Only $7.95

Humvee pre-cut pinewood derby car



Crush the competition with the Humvee Car

The Humvee is pre-drilled with two 3/8" weight holes in the rear. Just insert tungsten cylinder or zinc round weights and seal the hole with wood putty.

Only $7.95

The Cheetah PRO Racer pre-cut pinewood derby car

The fastest land animal is now the fastest pinewood derby PRO race car!

Only $6.95

The Sport Coupe PRO Racer pre-cut pinewood derby car

Sleek aerodynamic design with tapered front end

Only $6.95

The Street Car PRO Racer pre-cut pinewood derby car

Nobody beats the Street Car...nobody.

Only $6.95

Bullet Racer Pre-cut pinewood derby car

Shoot to the finish with this speedy car!
Sleek wheel struts in the rear make this car stand out.

Only $6.95

NASCAR pinewood derby car

Get the hottest car on the track with your NASCAR!


The NASCAR is pre-drilled with two 3/8" weight holes in the rear. Just insert tungsten cylinder or zinc round weights and seal the hole with wood putty.

Only $13.95

Viper pinewood derby car

Dominate the competition with this stealthy Viper.

This Viper car is has a weight cavity cut out under the car, so you can use any style of tungsten or zinc weights. We recommend glueing these weights onto the underside of your car.

Only $26.95

Cobra pinewood derby car

Strike down the competition with the venemous Cobra.
This Cobra car is has a weight cavity cut out under the car, so you can use any style of tungsten or zinc weights. We recommend glueing these weights onto the underside of your car.

Only $26.95

Indy F1 pinewood derby car

Race laps around your competition with the Indy F1 car.
This Indy F1 car is has a weight cavity cut out under the car, so you can use any style of tungsten or zinc weights. We recommend glueing these weights onto the underside of your car.

Only $26.95

Pinewood Derby Car Block
precision drilled with 2 speed options

Precision drilled axle holes so you can insert your axles with the push of a finger, fast and easy, plus your car rolls straight. Includes extra axle holes for extended wheelbase for stability and also raised wheel options to reduce friction further.

Only $8.95

The Wedge Axe Blade Racer
precision drilled with 2 speed options

Precision drilled axle holes so your car rolls straight. Includes extra axle holes for extended wheelbase for stability and also raised wheel options to reduce friction further!

Only $6.95

The Wedge Wing pre-cut pinewood derby car with pre-drilled weight holes

The Wedge Wing uses a standard BSA block with axle slots. We then drill the axle slots so they are straight, and we also drill optional holes for a raised wheel.

Lastly, this block is pre-drilled with four 3/8" weight holes so you can simply insert zinc round or tungsten weights.

Only $7.95

Pre-Weighted and primed pinewood derby Car

Pre-weighted and primed pinewood derby car body - The Grey Ghost.

They will only see the Ghost when it crosses the finish line...ahead of the pack.

Only $45.95

Pre-weighted and primed pinewood derby Lazer car body

The Lazer is a lower profile car than the Grey Ghost and a slightly lighter car body.

Only $45.95

Fully Built Cars - Ready to Race

fully built pinewood derby car with camoflauge body skin

Camo Car

Camo Car

The Camouflage Car is a fully built pinewood derby car. It is precision tuned and track tested.

Car includes lightly lathed BSA Speed Wheels, BSA polished axles, BSA block with drilled axle slots. The weight, balance and adjustments are precision tuned for highest performance. It is slightly underweighted so you can add stickers like our Military Firepower stickers.


Only $89.95

fully built pinewood derby car with hot flames body skin

Hot Flames Car

Hot Flames Car

The Hot Flames Car is a fully built pinewood derby car. It is precision tuned and track tested.

Car includes lightly lathed BSA Speed Wheels, BSA polished axles, BSA block with drilled axle slots. The weight, balance and adjustments are precision tuned for highest performance. It is slightly underweighted so you can add stickers.


Only $89.95

fully built pinewood derby car with green flames body skin

Green Flames Car

Green Flames Car

The Green Flames Car is a fully built pinewood derby car. It is precision tuned and track tested.

Car includes lightly lathed BSA Speed Wheels, BSA polished axles, BSA block with drilled axle slots. The weight, balance and adjustments are precision tuned for highest performance. It is slightly underweighted so you can add stickers.


Only $89.95

fully built pinewood derby car with tie-dye body skin

Tie-Dye Car

Tie-Dye Car

The Tie-Dye Car is a fully built pinewood derby car. It is precision tuned and track tested.

Car includes lightly lathed BSA Speed Wheels, BSA polished axles, BSA block with drilled axle slots. The weight, balance and adjustments are precision tuned for highest performance. It is slightly underweighted so you can add stickers.


Only $89.95

fully built yellow pinewood derby car

Blazing yellow Car

Blazing yellow Car

The Blazing Yellow Car is a fully built pinewood derby car. It is precision tuned and track tested.

Car includes lightly lathed BSA Speed Wheels, BSA polished axles, BSA block with drilled axle slots. The weight, balance and adjustments are precision tuned for highest performance. It is slightly underweighted so you can add stickers.


Only $89.95

wedge pre-cut pinewood derby car picture

Black Lightning

Black Lightning

If you can not build your own car, consider one of our completely built cars, like the Black Lightning.

Uses lightly lathed BSA Speed Wheels and BSA polished axles, precision tuned for highest performance.


Only $89.95

wedge pre-cut pinewood derby car picture

Red Thunderbolt

Red Thunderbolt
Pre-Built BSA pinewood derby car

Same as black lightning above, completely pre-built car, track tested for speed, with BSA Speed Wheels and BSA Polished Axles.


Only $89.95

wedge pre-cut pinewood derby car picture

Blue Flash

Blue Flash
Pre-Built BSA pinewood derby car

Same as black lightning above, completely pre-built car, track tested for speed, with BSA Speed Wheels and BSA Polished Axles.


Only $89.95
PRO Car

wedge pre-cut pinewood derby car picture

PRO Car

PRO Car
Pre-Built BSA Car pushes Speed Limits!

Complete pre-built car for those that are out of time and want a super fast car.

The PRO Car uses our PRO Super Speed axles with our exclusive graphite-coating, along with our PRO BSA Ultra-Lite wheels with a graphite-coating on the wheel tread and hub.

  • Raised front wheel
  • It is a "rail rider"
  • Optimal center of gravity
  • Perfect 5.0oz weight
  • Drilled axle holes for perfect alignment
  • 12 coats of paint with high gloss sealer

Car is track tested and precision tuned for highest performance.


Only $105.95
    • Pinewood Pro Security Verified Trust





    • Risk Free Guarantee Pinewood Pro




      Pinewood Derby
      Tips & Hints

      Many of the BSA "nails" that come in your kit are crooked. Chuck each axle in your drill and spin them. If the axle looks blurry as it spins, that axle is crooked. Replace crooked axles or consider getting an Axle Press Tool to straighten crooked axles.








      Pinewood Derby
      weights Tip

      Tungsten weights are ideal for pinewood derby cars. Tungsten is about 1/3 smaller than a zinc piece with the same weight. Therefore, you can pack Tungsten weights in a smaller area to optimize your center of gravity to maximize inertia giving you greater speed at the finish gate.



      Pinewood Derby
      building Hint

      If your block is cracked, don't panic! The only problem with a cracked block is if the crack is near the axle, which can cause the axle to move. Random cracks in safe areas can simply be filled with wood filler.



    • Helping Pinewood Derby Racers
      pinewood derby authority
      ...for over 15 years.

    • Race winner for years, fastest

      Once we ordered your tips and tricks we won 1st place every year since. Thank You so much for this information and making my son's pinewood derby career a success.
      - Keith



    • very respectable

      We came in fourth place; very respectable, given it was our first time. Thanks very much for helping us overcome our building weaknesses with great products.
      - Doug and Taiki from VA



    • pinewood derby car race winners

      After 4 years of not winning, we finally did it!! Your book truly worked!!
      - Wayne from CA



    • pinewood derby winner with trophy

      My son, won his pack derby today on our first attempt! He won 9 races in a row and none of them were even close. Thanks for your assist in this father & son memory.
      - Kevin from VT



    • father scout winning team

      Hey Joe- Just wanted to pass on the good news- and a few nice pix. We ended up in 2nd place out of 63 cars racing. Not too bad, and we'll be at district in a few weeks.
      - David from IL



    • We downloaded Winning Pinewood Derby Secrets and began reading and working. We won first place overall in our Pack! Alex is a Webelos 2 this year, so it was our last chance and we won!
      - Brad and Alex



    • pinewood derby trophy winners

      We ran our 3 cars at a local pack meet, and what a great time my kids had. Both of my two boys prepared their cars with your tooling. My boys were given first and second place.
      - Brian from DE



    • Armed with tips from your Winning Pine Wood Derby Secrets

      Armed with tips from your Winning Pine Wood Derby Secrets, and graphite powder, Sean's car raced ahead of the wolf pack! Thanks again for you excellent website, materials, and products!
      - Mark & Sean



    • Using these axles and BSA speed wheels, we set a track record, went undefeated and won the pack championship. My son is thrilled to be heading to districts and let me tell you, a winning scout is a happy scout. Can't recommend these enough!
      - Natalie from CO

    • father-son derby winner

      This was my 7 year old son's first Pinewood Derby and I would have paid 100 times the price just to see the expression on his face when he took first! Your information was invaluable!
      Fred & Vincent

    • Thanks for helping out with these orders. I appreciate the quality of your customer service and will definitely recommend your company to others in my son's pack. Cheers!
      - Thomas from NC

    • won his first pack race

      James won his first pack race and also won the district race. He never lost a race using your products. Thank you for all you are doing.
      - Jim

    • first

      This was my 7-year-old's first Pinewood Derby and he won 1st! We followed your Winning Pinewood Derby Secrets and his car smoked other the cars by 4-5 car lengths each race. Thanks again.
      - John

    • I have purchased from you for two consecutive years and am an extremely satisfied customer. The order arrived promptly and I am very pleased with your products and service. Thank you so much!
      - Trey from SC

    • won the entire event

      My son won the entire event, even against the older scouts. Thanks
      - Rodd

    • You guys are amazing. Thank you for such prompt attention. We will deal with you from now on. I have at least 9 more years of pinewood cars to make, and it's your products that will help us through them. Thank you soooo much!
      - Lisa from CA

Pre-Cut Pinewood Derby Cars